Flexible Shafts ('BFS' Series)

Product Description

Flexible Shafts (BFS Series) It is used for cleaning of tube by transmitting power in terms of rotation from the motor unit to tool head cutter or brush within tube. INNER CORE : It is flexible wire with multiple wound opposite layer. It is made of high tensile spring steel or stainless steel (as per requirement) and passed through heat treatment processes to make it absolutely vibration free. Outer Casing: It is flexible, double interlocked, circular rounded, made of galvanized steel strip, Special spring steel lining is provided within outer casing to avoid any friction between inner core & outer casing. Connection : One end of shaft with machine end socket is attached to suitable motor and other end is attached to tool end. For Domestic or Indian Flexible Shafts, Sizes are as follows : Model: BFS-105: : Inner core: 12.5mm Outer casing: 26.5mm Model BFS-106: : Inner core: 15mm Outer Casing: 33mm Model: BFS-107: Inner Core: 18.5mm Outer Casing: 35.5mm INNER CORE DIAMM (INCH) 11.0 MM(7/16") Half Inch13MM 15MM(5/8") 19.0 MM(3/4") OUTER CASINGMM (INCH) 22.0 MM(7/8") 24.0 MM(15/16" 29.0 MM(1.14") 33.0 MM(1.3") LENGTH Mtrs. Feet Sr. No. MODEL NO. MODEL NO. MODEL NO. MODEL NO. 6.0 20.0 1 BFS-104-20 BFS-105-20 BFS-106-20 BFS-107-20 7.5 25.0 2 BFS-104-25 BFS-105-25 BFS-106-25 BFS-107-25 8.0 27.0 3 BFS-104-27 BFS-105-27 BFS-106-27 BFS-107-27 9.0 30.0 4 BFS-104-30 BFS-105-30 BFS-106-30 BFS-107-30 10.0 33.0 5 BFS-104-33 BFS-105-33 BFS-106-33 BFS-107-33 12.0 40.0 6 BFS-104-40 BFS-105-40 BFS-106-40 BFS-107-40 15.0 50.0 7 BFS-104-50 BFS-105-50 BFS-106-50 BFS-107-50 18.0 60.0 8 BFS-104-60 BFS-105-60 BFS-106-60 BFS-107-60 20.0 65.0 9 BFS-104-65 BFS-105-65 BFS-106-65 BFS-107-65 25.0 82.5 10 BFS-104-82 BFS-105-82 BFS-106-82 BFS-107-82 30.0 100.0 11 BFS-104-100 BFS-105-100 BFS-106-100 BFS-107-100 Spare Inner Core Per Meter BIC-104 BIC-105 BIC-106 BIC-107 Spare Outer Casing Per Meter BOC-104 BOC-105 BOC-106 BOC-107 Spare Hand Piece BHP-104 BHP-105 BHP-106 BHP-107 Note : Tolerance for inner cores Are +0.5mm Tolerance for outer casing Are + 1mm